ENGINE CLEAN - GAS OR DIESEL 300mL
- Engine cleaner
- Additive to add to engine oil before drain
- For gasoline and Diesel car engine
Type of Use
- MOTUL ENGINE CLEAN is designed to be used in all types of Diesel and gasoline engines with injection or carburettor(s), with or without catalytic converter, using all kind of fuel.. MOTUL ENGINE CLEAN effectively cleans dirtying and clogging which appear in the engine. The removed microparticles
are then evacuated at the time of the oil drain. MOTUL ENGINE CLEAN provides a perfect lubrication during cleaning process.
- MOTUL ENGINE CLEAN, added to engine oil before draining, allows to :
- lower the wear
- decrease oil and fuel consumption
- increase compressions on the same way on all the cylinders
- decrease exhaust pollutants emissions
- evacuate deposits, varnishes and other combustion residues from problem areas such as hydraulics lifters or piston grooves and rings
- take advantage of fresh oil which will fill engine after draining
- increase catalytic converter's lifetime
- Before each oil drain, add, in the engine, a can of ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the filter.
- The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN is to be added per supplementary litre of engine oil (over 5 litres) . Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.
- Combined with DIESEL SYSTEM CLEAN or FUEL SYSTEM CLEAN, ENGINE CLEAN provides a very appreciable reduction of pollutants emissions to pass Vehicle Inspection.
|Density at 20°C
||NF T 60 101
||NF T 60 118