Gear 300 75W90
$34.23
PART NUMBER: 105777
TYPE OF USE
- High Performance gear oil specially designed for racing vehicle gearboxes: speed way, rally, raid… etc. and any other high loaded applications.
- All mechanical transmissions synchronized or non-synchronized gearboxes, gearbox/differential, transfer boxes or hypoid differentials without limited slip system, and all transmissions systems using gears, bevel gears, stepdown gears, speed reduction boxes, propeller boxes…etc. operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.
PERFORMANCE
- Standards: API GL-4 / GL-5, MIL-L 2105 D
- High Performance 100% Synthetic - Ester based lubricant reinforced with EP - "Extreme Pressure" additives to protect against wear and for a higher resistance at high temperature and a longer lifetime.
- 0% shear loss: Unshearable oil film even in extreme conditions.
- Stays in viscosity grade 90 after KRL 20 hours shear test as requested by SAE J306 standard for gear oils.
- Very high lubricating power which decreases friction and wear.
- Viscosity grade 90 at high temperatures to provide outstanding oil film resistance at high temperatures and/or to reduce transmission noise.
- Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
- Less effort required on the gear lever to shift the gears.
- Suitable for any type of seal and yellow material used in gearboxes design.
- Anti-corrosion, Anti-foam, Anti-emulsion.
PROPERTIES
Viscosity grade | SAE J 300 | 75W-90 |
Density at 20°C (68°F) | ASTM D1298 | 0.897 |
Viscosity at 40°C (104°F) | ASTM D445 | 86.5 mm²/s |
Viscosity at 100°C (212°F) | ASTM D445 | 14.2 mm²/s |
Viscosity Index | ASTM D2270 | 170.0 |
Pour point | ASTM D97 | -54.0 °C / -65.0 °F |
Flash point | ASTM D92 | 204.0 °C / 399.0 °F |